Banner

Automatic Cord Reels Endurance Tester for IEC60335 Automatic Cord Reels Test Equipment

We are pressional Automatic Cord Reels Endurance Tester manufacturers,Automatic Cord Reels Endurance Tester,to determine endurance of automatic cord reels , in accordance with IEC60335-1 clause 22.16 and UL1017 clause 5.16.

  • Item NO.:

    ZLT-JX
  • Order(MOQ):

    1
  • Payment:

    T/T
  • Product Origin:

    China
  • Shipping Port:

    Guangzhou
  • Lead Time:

    30 days
  • Product Detail

Automatic Cord Reels Endurance Tester

Automatic Cord Reels Endurance Tester for IEC60335 Automatic Cord Reels Test Equipment

Product details: Model ZLT-JX.

To determine endurance of automatic cord reels , in accordance with IEC60335-1 clause 22.16 and UL1017 clause 5.16.

Two-thirds of the length of the cord is unreeled. If the withdrawable length of the cord is less than 225 cm, the cord is unreeled so that a length of 75 cm remains on the reel. An additional length of 75 cm of the cord is then unreeled and pulled in a direction so that the greatest abrasion occurs to the sheath, taking into account the normal position of use of the appliance. Where the cord leaves the appliance, the angle between the axis of the cord during the test and the axis of the cord when it is unreeled without substantial resistance is approximately 60°or 90°. The cord is allowed to be recoiled by the reel.

The test is carried out 6 000 times at a rate of approximately 30 times per minute (or 10 times per minute, in accordance with UL1017 clause 5.16)or at the maximum rate allowed by the construction of the cord reel if this is less.

Technical Parameter:

Power supply: AC220V50Hz,other voltages on request.
Air supply:

Compressed air 5~7kg/cm2 (air to be supplied by the customer),

Test rats: 30 times per minute or at the maximum rate allowed by the construction of the cord reel if this is less.
Test times:

0~9999 times; no more test can be conducted if the number of test already conducted has reached the required one (able to be preset),

Driving means: Driven by air(compressed air),by PLC control.
Angle:

30~90°, adjustable,

Automatic Cord Reels Endurance Tester

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Inclined plane device
Inclined Plane Stability Test Device
We are professional Inclined plane device manufacturers,inclined plane stability test device,to determine the stability of electric appliances which are used on a table or on the floor, in accordance with IEC60065 clause 19.1, IEC60335-1 clause 20.1, IEC60601-1 clause 24.1, IEC 60950 clause 4.1.1.
toaster switch endurance test machine
Toaster Switch Endurance Test Machine
We are professional Toaster Switch Endurance Test Machine manufacturers, Toaster Switch Endurance Test Machine,endurance test machine for toasters,to determine on-off of switch of the toasters,in accordance with the IEC60335-2-9 clause 19.101.
key switch endurance tester
Key Switch Endurance Testing Machine for IT products
We are professional key switch endurance test machine for IT product manufacturers,Mainly used to determine key switch pressing test for IT products, such as mobile phone , remote controller or car keys and other small touch keys .
microwave oven door endurance tester
Microwave Oven Door Endurance Tester
We are professional Microwave oven door Endurance tester manufactuers,the microwave oven doorendurance tester,to determine the endurance of the door system, including the hinges, microwave seals and other associated parts, shall be constructed to withstand wear that may be expected in normal use, according to the IEC60335-2-25 clause 18.
electric iron drop tester
Electric Iron Drop Tester of IEC60335-2-3 Mechanical Strength Tester
We are professional Electric Iron Drop Tester manufacturers,electric iron drop tester,conform to IEC60335-2-3 Mechanical Strength Test machine
flexing test for foot warmers
Flexing Test Equipment for Foot Warmers
We are professional Foot warmers flexing test equipment manufacturers, flexing test apparatus for foot warmers, conform to IEC60335-2-81 clause 21.101 and figure 101.
 IEC60335-2-23 Swivel Test Machine
Supply Cord Rotated Tester for IEC60335-2-23 Swivel Test Machine
We are professional Swivel Test Machine manufacturers,For continuous bending tests by swivelling movements to check supply cord where it enters the appliance, in accordance with IEC60335-2-23 clause 11.101.
cordless kettle insert pull tester
Cordless Kettle Insert-Pull Test Equipment for IEC60335-2-15
We are professional Codless kettle insert-pull test euipment manufacturers,To use for the insert-pull test of cordless kettle and foundation, in accordance with IEC60335-2-15 clause 22.103.

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact