Banner

Covering Scratch Test Machine for IEC60335 Solid Insulation Scratch Tester

Covering scratch test machine,to determine the adherence and the durability of protective coverings on printed circuit board and of insulating layers on accessible hazardous parts or metal partsaccording to IEC60950 figure 2K and clause 2.10.8.4,IEC60335-1 clause 21.2.

  • Item NO.:

    ZLT-GC1
  • Order(MOQ):

    1
  • Payment:

    T/T
  • Product Origin:

    China
  • Shipping Port:

    Guangzhou
  • Lead Time:

    20 days
  • Product Detail

Covering Scratch Test Machine

Covering Scratch Test Machine for IEC60335 Solid Insulation Scratch Tester

Product details: Model ZLT-GC1.

To determine the adherence and the durability of protective coverings on printed circuit board and of insulating layers on accessible hazardous parts or metal partsaccording to IEC60950 figure 2K and clause 2.10.8.4,IEC60335-1 clause 21.2.

Scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests.

Standard Outfit:

1 steel stylus as scratch tool, hardened, lower end tapered with a bevel angle of 40°and a radius of 0,25±0,02mm at its tip,

1 linear sliding carriage, with free-moving guideway for the steel stylus in a vertical plane with an angle of 80°~85° between the longitudinal axis of the steel stylus and the horizontal,

1 weight piece to weight the steel stylus so that the force in the direction of the steel stylus axis is 10N±0,5N,

1 drive for moving the sliding carriage by its full travel of approx 140mm at speed of 20±5mm/s, the scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.

1 specimen support for specimens with max, dimensions: length approx.200mm,width approx.200mm, height approx. 6mm,

1 operation manner: touch screen controller

Special outfit: pressure test device, for after scratch test, the hardened steel pin is then applied perpendicularly with a force of 30N±0,5N to an unscratched part of the surface. The insulation shall then withstand the electric strength test of IEC60335-1 clause 16.3 with the pin still applied and used as one of the electrodes.

Power supply: 220V50Hz other voltages request.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
mandrel test apparatus
Mandrel Test Apparatus of IEC62368 Figure 25 Mandrel Testing
Mandrel Test Apparatus,according to IEC62368 figure 25 Mandrel testing.
Dielectric strength test instrument
Dielectric Strength Test Instrument for Solid Insulation Test Machine
Professional Quality Assurance Equipment Factory Specialists for IEC,UL,BS,VDE compliant test equipment,Dielectric Strength Test Instrument,To test the surge strength according to IEC60065 figure 6,IEC62368 figure 29 and UL1310 clause 40.2
wedge tool
Wedge tool of IEC60601-2-52 Wedge Test Tool
Professional Quality Assurance Equipment Factory Specialists for IEC,UL,BS,VDE compliant test equipment.Wedge tool of IEC60601-2-52 Wedge Test Tool.
loading pad
Loading Pad for Medical Beds of IEC60601-2-52 Test Device
Professional Quality Assurance Equipment Factory Specialists for IEC,UL,BS,VDE compliant test equipment.Loading Pad Tester for Medical Beds.
small pars cylinder
Small Pars Cylinder of IEC60335 Test Instruments
Professional Quality Assurance Equipment Factory Specialists for IEC,UL,BS,VDE compliant test equipment.Small Pars Cylinder of IEC60335 Test Instruments.
ingestion gauge
Ingestion Gauge for IEC62133-2 Small Cells Test Instrments
Professional Quality Assurance Equipment Factory Specialists for IEC,UL,BS,VDE Compliant Test Equipment,Ingestion Gauge for IEC62133-2 Small Cells Test Instruments.
crush test flat surface
Crush Test Flat Surface for the Equipment Containing Coin of IEC62368 Crush Test Machine
Professional Quality Assurance Equipment Factory Specialists for IEC,UL,BS,VDE compliant test equipment.Crush Test Flat Surface for the Equipment Containing Coin of IEC62368 Crush Test Machine
compression test device
Compression Test Device for the Gasket with Closed Cell Construction of IEC62368 Gasket Test
Professional Quality Assurance Equipment Factory Specialists for IEC,UL,BS,VDE compliant test equipment.Compression Test Device for the Gasket with Closed Cell Construction of IEC62368 Gasket Test.

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact