Banner

High Voltage Arc Ignition Tester of UL746A Arc Resistance Tester

High voltage Arc Ignition tester,conform to UL746A,IEC61621, and ASTMC495.

  • Item NO.:

    ZLT-HVL
  • Order(MOQ):

    1
  • Payment:

    T/T
  • Product Origin:

    China
  • Shipping Port:

    Guangzhou
  • Lead Time:

    30 days
  • Product Detail

High Voltage Arc Ignition Tester

High Voltage Arc Ignition Tester of UL746A Arc Resistance Tester

Product details:Model ZLT-HVL

High Voltage Arc Ignition Tester
This test method covers, in a preliminary fashion, the differentiation among similar materials with respect to their resistance to the action of a high-voltage, low-current arc close to the surface of insulation, intending to form a conducting path therein or in causing the material to become conducting due to the localized thermal and chemical decomposition and erosion,according to IEC61621,ASTMC495,UL746A clause 22.2.
Standard Outfit:
1 arc-resistance test circuit, to provide high-voltage up to 12.5KV, adjustable 
1 current control resistors set with R10,R20,R30,R40-four resistors,provide arc currents of 10mA,20mA,30mA and 40mA respectively,
1 milliammeter,A-An ac milliammeter capable of reading from 10mA  to 40mA with an error of not over±5%,
1 electrode set ,are made from 2,4mm±0,05mm diameter tungsten rod which is free from cradks,pits or rough spots,the free electrode length shall be a minimum of 20mm,shall be ground and polished to produce and angle of 300±1 0to the axis,
1 electrode fixture ,to provides a means of holding the electrodes and the test specimen at the proper angle for applying the arc to the tip surface of the test specimen,each electrode shall be adjusted so that it rests independently on the test specimen with a force of 0,5N±0,05N,they lie in the same vertical plane and are both inclined 350±10 from the horizontal, 
1 gauge, to measure the 6.35mm±0.08mm of two space the tips,
1 test chamber,enclosure without venting,dimensions not smaller than 300mm×150mm×100mm,
Power supply: 220V50Hz other voltages request.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
glow wire test
Glow Wire Test Apparatus with Fume Cupboard of IEC60695-2-10 Glow Wire Tester
Glow Wire Test Equipment.To determine the fire resistance by the fire hazard test, accordance with IEC60695-2-10, IEC60335, IEC60598 and other standards.
needle flame test apparatus
Needle Flame Test Chamber of IEC 60695-11-5 Fire Hazard Testing
Needle Flame Test Machine.The instrument is designed to conform to the IEC60695-11-5, IEC60695-2-2 and other most commonly used standards in the market.
tracking index tester
Tracking Index Tester of IEC60112 Proof Tracking Test Device
The ZLT Tracking Tester is used for the determination of comparative tracking indices of solid electrical insulating materials on pieces taken from parts of electrical and electronic equipment and on plaques of material using alternating voltages,conform to IEC 60112,IEC 60335-1,IEC 60884.
Flammability tester of plastic materials
Flammability tester of plastic materials for ul94 Federal Aviation Regulation Bunsen Burner Test Apparatus
Flammability tester of plastic materials for UL94,IEC60695-11-3,IEC60695-11-4,IEC60695-11-10,IEC60695-11-20..
high current ARC restistance to ignition
High Current ARC Resistance to Ignition of UL746A HAI
High Current ARC Resistance to Ignitiong(HAI) ,conform to UL1082 and UL746A.
hot wire coil ingitableility test
Hot Wire Coil Ignitability Test Apparatus of IEC60695-2-20 Hot Wire Based Test
To measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source, according to IEC60695-2-20.
flame tester
Pressure Sensitive Adhesive Tapes Flame Test Apparatus of IEC60454-2
Insulating Tape Flame Test Apparatus of UL510 clause 6,Pressure-sensitive adhesive tapes flame test apparatus of IEC60454-2 clause 20.
Vehicle Interior Material Vertical Flammability Tester
Vehicle Interior Material Vertical Flammability Tester Vertical Burning Rate of Materials Tester
Vehicle Interior Material Vertical Flammability Tester Vertical Burning Rate of Materials Tester.Test to determine vertical burning rate of certain category automobile interior material , according to DBL5307 clause 6.2, GB32086.

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact