Banner

IEC60335-1 Clause 25.15 Cord Anchorage Torque Testing Machine

We are professional Power Cord Pull Force and Torque Tester manufacturers,power cord pull force and torque tester, in accordance with IEC60335-1 clause 25.15, IEC 60950-1 clause 3.2.6, IEC60601-1 clause 8.11.3.5,and IEC 60065.

  • Item NO.:

    ZLT-LN1
  • Order(MOQ):

    1
  • Payment:

    T/T
  • Product Origin:

    China
  • Shipping Port:

    Guangzhou
  • Lead Time:

    20 days
  • Product Detail

Power Cord Strain And Twist Tester 
IEC60335-1 Clause 25.15 Cord Anchorage Torque Testing Machine Cable Tester
Product details: Model ZLT-LN1
To determine the strain and twisting of the supply cord where it enters the appliance, in accordance with IEC60335-1 clause 25.15, IEC 60950-1 clause 3.2.6, IEC60601-1 clause 8.11.3.5,and IEC 60065.
Appliances provided with a supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall have a cord anchorage. The cord anchorage shall relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion.
A mark is made on the cord while it is subjected to the pull force shown in follow table, at a distance of approximately 20 mm from the cord anchorage or other suitable point. 

The cord is then pulled, without jerking, for 1s in the most unfavorable direction with the force specified. The test is carried out 25 times.  The cord, unless on an automatic cord reel, is then subjected to a torque that is applied as close as possible to the appliance. The torque is specified in following table and is applied for 1 min. 

During the tests, the cord shall not be damaged and shall show no appreciable strain at the terminals. The pull force is reapplied and the cord shall not be longitudinally displaced by more than 2 mm.  
Standard Outfit:
1 set of pull weights, 20N*2-30N*2, for strain 30 N-40N -60 N-100 N,
1 set of torque weights, 2.86N-7.14N-10N, for torques 0.1Nm-0.25Nm-0.35Nm,
1 speed fixed system, 1 times/s tension frequency, 
1 control unit with 4 digit (0-9999) predetermining counter to switch off the drive, and records the number of tension times and torque time,
Power Supply: A.C.220V 50Hz, other voltages and frequencies on request.

Pull and Strain Tester














Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
deformation test apparatus
Deformation Test Apparatus of UL 1581 560 Testing Machine
Deformation Test Apparatus ,to determine the deformation which wire in a high temperature and load, in accordance with UL1581 560 test, and figure 560.1.
cold bend test apparatus
Cold Bend Test Apparatus of Bending Test at Low Temperature for Insulations
Cold bend test aparatus,to determine the bending stability at low temperature of insulated cords and cables up to 12,5mm diameter in cold test chambers or freezers with mandrels to 50mm diameter, according to IEC60811-1-4 clause 8.1 figure 1,IEC 60598-2-21 clause 21.7.5 test 4 figure 2.
flexing test apparatus
Flexible Cable Flexing Test Apparatus
We are professional Flexible Cable Flexing Test equipment manufacturers.Flexible cable flexing apparatus,conform to IEC60245-2 figure 1, IEC60227-2 figure 1, IEC60065 Table 11,EN50396 clause 6.2 and figure 4.
Three pulley flexing tester
Three Pulley Flexing Tester of IEC60245
We are professional Three Pulley Flexing Tester manufacturers,threepulley flexing tester, conform to  IEC60245-2 figure 1 and figure 6 flexing apparatus.
Flexing Test Apparatus
IEC60335 Flexing Test Apparatus
We are professional Flexing Test Apparatus manufacturers.Flexing Test Apparatus, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 1.
automatic cord Reels Endurance Test machine
IEC60335 Automatic Cord Reels Endurance Test Machine
We are professional Automatic Cord Endurance Test Machine  manufacturers.To determine endurance of automatic cord reels , in accordance with IEC60335-1 clause 22.16 and UL1017 clause 5.16.
supply cord rotation tester
Supply Cord Rotation Test Equipment of IEC 60335-2-23
We are professional Supply Cord Rotation Test Equipment manufacturers,supply cord rotation tester,for continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335-2-23 clause 11.101.
 internal cord bending tester
IEC60335 Internal Cord Bending Test Machine
We are professional internal cord flexing test equipment manufacturers.Internal Cord Flexing Test Equipment.For continuous bending tests by swiveling movements to check internal wire where electrical connections and internal conductors of movable instrument parts in normal use or maintenance, in accordance with IEC60335-1 clause 23.3.

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact