Banner

IEC60335 Power Cord Swivel Connection Endurance Flexing Cable Tester

For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 1.

  • Item NO.:

    ZLT-JDW1R
  • Order(MOQ):

    1
  • Payment:

    T/T
  • Product Origin:

    China
  • Shipping Port:

    Guangzhou
  • Lead Time:

    20 days
  • Product Detail

Power Cord Flexibility Tester
IEC60335 Power Cord Swivel Connection Endurance Flexing Cable Tester
Product details: Model ZLT-JDW1R.

For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 1.

The part of the appliance that includes the inlet opening is fixed to the oscillating member so that, when the supply cord is at the middle of its travel, the axis of the cord where it enters the cord guard or inlet is vertical and passes through the axis of oscillation. The major axis of the section of flat cords shall be parallel to the axis of oscillation. 

The cord is loaded so that the force applied is 
– 10 N, for cords having a nominal cross-sectional area exceeding 0,75 mm2; 
– 5 N, for other cords. 

The distance X, as shown in IEC60335 figure 8, between the axis of oscillation and the point where the cord or cord guard enters the appliance, is adjusted so that when the oscillating member moves over its full range, the cord and load make the minimum lateral movement. 
The oscillating member is moved through an angle of 90° (45° on either side of the vertical), the number of flexing for type Z attachments being 20 000 and for other attachments 10 000. The rate of flexing is 60 per minute. 

Standard Outfit:
1 electric drive motor with reduction and swiveling gear,
1 output shaft, swiveling angle 45°,60°or 90°on either side of the vertical,
1 sets of weights, 5N-10N,
1 speed adjustment, for swiveling frequency 10~60 rpm,
1 control unit with 6 digit predetermining counter to switch off the drive, and records the number of swiveling when the sample open circuit,
1 control circuit of 3 KVA power output, power supply to specimen,
PLC Controller 
Power Supply: A.C.220V 50Hz, other voltages and frequencies on request.





Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
deformation test apparatus
Deformation Test Apparatus of UL 1581 560 Testing Machine
Deformation Test Apparatus ,to determine the deformation which wire in a high temperature and load, in accordance with UL1581 560 test, and figure 560.1.
cold bend test apparatus
Cold Bend Test Apparatus of Bending Test at Low Temperature for Insulations
Cold bend test aparatus,to determine the bending stability at low temperature of insulated cords and cables up to 12,5mm diameter in cold test chambers or freezers with mandrels to 50mm diameter, according to IEC60811-1-4 clause 8.1 figure 1,IEC 60598-2-21 clause 21.7.5 test 4 figure 2.
flexing apparatus
Flexible Cable Flexing Apparatus of IEC 60245 Flexing Tester
Flexible cable fiexing apparatus,conform to IEC60245-2 figure 1, IEC60227-2 figure 1, IEC60065 Table 11,EN50396 clause 6.2 and figure 4.
Three pulley flexing tester
Three Pulley Flexing Tester of IEC60245 Flexing Apparatus
Professional Quality Assurance Equipment Factory Specialists for IEC,UL,BS,VDE compliant test equipment.Three pulley flexing tester of IEC60245-2 figure 1 and figure 6 flexing apparatus.
Cord Anchorage Torque Test Equipment
IEC60335-1 Clause 25.15 Cord Anchorage Torque Testing Machine Cable Tester
To determine the strain and twisting of the supply cord where it enters the appliance, in accordance with IEC60335-1 clause 25.15, IEC 60950-1 clause 3.2.6, IEC60601-1 clause 8.11.3.5,and IEC 60065.
Cord Reels Endurance Test Apparatus
IEC60335-1 Automatic Cord Reels Endurance Tester Strength Test Machine
To determine endurance of automatic cord reels , in accordance with IEC60335-1 clause 22.16 and UL1017 clause 5.16.
Power Cord Rotation Tester
IEC60335 Power Cord Rotation Tester Test Equipment
For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335-2-23 clause 11.101.
 Cord Bending Tester
IEC60335 Internal Cord Bending Test Machine
For continuous bending tests by swiveling movements to check internal wire where electrical connections and internal conductors of movable instrument parts in normal use or maintenance, in accordance with IEC60335-1 clause 23.3

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact