Banner

Plug and Socket Testing Unit of IEC60884 figure 16 Normal Operation Test

Plug and Socket Testing Unit of IEC60884 figure 16 Normal Operation Test.
  • Item NO.:

    ZLT-CS
  • Order(MOQ):

    1
  • Payment:

    T/T
  • Product Origin:

    China
  • Shipping Port:

    Guangzhou
  • Lead Time:

    20 days
  • Product Detail

Plug and Socket Testing Unit of IEC60884 Figure 16 Normal Operation Test

Product details:Model ZLT-CS

To test plugs and socket-outlets, cable couplers and appliance couplers having rated currents up to 16 A, for household and similar purposes at room temperature-concerning their breaking capacity and their capability to withstand the stresses occurring in normal use, according to IEC 60884-1 figure 16 and clause 20.

Test requirement:

Socket-outlets are tested using a test plug with brass pins provided, if applicable, with insulating sleeves, an having the maximum specified dimensions,with a tolerance of 0-0.06 mm, and spaced at the nominal distance,with a tolerance of +0,050 mm. As far as the extremities of the sleeves are concerned, it is sufficient that their dimensions are within the tolerances given in the relevant standard sheet.For accessories with a rated voltage lower than or equal to 250 V and a rated current lower than or equal to 16 A, the length of the stroke of test apparatus is between 50 mm and 60 mm. The plug is inserted and withdrawn from the socket-outlet 50 times(100 strokes) at a rate of

--30 strockes per minute for accessories having a rated current up to and including 16A and a rated voltage up to and including 250 V;

--15 strokes per minute for other accessories.

Standard outfit:

 1 or 2 or 3 slide(s),with ball bearing guide, with spring loaded support for fastening the moving part for the specimens, with double acting the actuation speed, with safety sockets to connect the specimens to exteranl test voltages


1 or 2 or 3 holder(s), multiple of steel, with protective hood

1 plug-in unit with front panel for the operating devices

1 control device for each slide: programmable control unit with exchangable programme modules(containing the “test rhythm”) and for adjusting and indicating the test parameters”number of strokes”, “stroke time” and “time until the retracting stroke”(to control the time during of wich the test current is flowing), with start and stop push-buttons and with push-buttons for moving manually the cylinder pistons and as actuation indicator for the cylinders.Connection to AC220V50Hz,other voltages and frequencies on requst. 

        For one specimen,model ZLT-CS1

       For two speciment, model ZLT-CS2

       Fow three speciment,model ZLT-CS3



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
flexing test
Flexing Test Apparatus of UL 817 Flexing Test
For continuous bending tests by swivelling movements to check 6 cables simultaneously fitted with plugs or entries from electric tools and from hand lamps, in accordance with IEC60884-1 figure 21 and VDE0620 figure 21, UL 817 figure 11.3.
Indentation Test Apparatus
Apparatus for Pressure Test at High Temperature of IEC60884 Figure 41 Indentation High Temperature Pressure Test Apparatus
Indentation tester,for pressure tests on plug pin insulating sleeves at temperatures to 200℃ with 2,5N loads, according to IEC60884-1 figure 41,BS1363 figure 10
flexing test swivel machine
Flexing test Swivel Machine of IEC 60884 Flexing Test Equipment
Flexing test Swivel Machine of IEC 60884 Flexing Test Equipment, in accordance with IEC60884-1 figure 21 and VDE0620 figure 21.
equipment to load the samples with current
Equipment to Load the Samples with Current for IEC 60884 Clause 23,4 Test Device
Equipment to Load the Samples with Current for IEC 60884 Clause 23,4 Test Device.Installed into the test machine ZLT-DW2.
plug pin abrasion testing machine
Test Apparatus for Abrasion Test on Insulating Sleeves of Plug Pins of IEC60884 Plug Pin Abrasion Testing Machine
Plut pin abrasion testing machine,to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to IEC60884-1 Fig 28, EN 50075 Fig 9, VDE0620 bile 29 and BS1363 Fig 9.
socket outlet torque balance
Socket-outlet Torque Balance for IEC62368 Clause 4,7 Equipment for Direct Insertion into mains Socket-outlets Testing Machine
For measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with I EC60065 clause 15.4.1 and figure 11, IEC60335-1 clause 22.3, IEC60884-1 clause 14.23.2,IEC62368 clause 4,7.
cord anchorage testing machine
Cord Anchorage Testing Machine of IEC60884 Cord Retention Testing Apparatus
For testing cable connections with intermittent tensile load in according to IEC60884/2006 figure 20, VDE0620 Bild 20. 
torque test  device
Torque Test Values for Cord Anchorages of IEC 60884 Table 18 Torque Test Device
This device is for testing the resistance to torque of cord anchorages at electrical appliances provided with non-detachable flexible cords with a diameter up to 10 mm and torques up to 0,425N.m according to IEC60884-1 clause 23.2(table 18),VDE0620 clause23.2(table18),IEC60335-1 table12 clause 25.15.

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact