Banner

Vehicle Interior Material Vertical Flammability Tester

We are professional Vehicle Interior Material Vertical Flammability Tester manufacturers,Vertical Burning Rate of Materials Tester.Test to determine vertical burning rate of certain category automobile interior material , according to DBL5307 clause 6.2, GB32086.


  • Item NO.:

    ZLT-CV1
  • Order(MOQ):

    1
  • Payment:

    T/T
  • Product Origin:

    China
  • Shipping Port:

    Guangzhou
  • Lead Time:

    20 days
  • Product Detail

Vehicle Interior Material Vertical Flammability Tester 

Vertical Burning Rate of Materials Tester

Product details:Model ZLT-CV1

Test to determine vertical burning rate of certain category automobile interior material , according to DBL5307 clause 6.2, GB32086.

Standard Outfit:

1 Specimen holder,consists of a right-angled frame 560 mm high with 2 vertical bars connected permanently at a distance of 150 mm to which tips are attached,the tips that hold the specimen shall have a diameter of max.2 mm and a length of min.27 mm,so that the test specimen can be attached at a level at least 20 mm from the frame,

1 flame test,with a gas burner,shall be placed under the test specimen so that its axle is positioned in the center of the bottom edge of the test specimen,and shall be tilted 300 until vertical ,the distance between burner tip and specimen bottom edge shall be 20mm,

1 Ventilation system,shall be large enough to ensure the air velocity in vertical direction in the exhaust shall be between 0.10 m/s ~0.30 m/s.

1 Gauge,560×160 mm,is used for marking the positions of the attachment tips on the test specimen,in each corner of the measuring gauge, holes of ca.2 mm diameter shall be drilled which correspond to the position of the tips of the specimen holder.

1 protective device, ≥0.23 m3 ,

1 scale to measure the flame height,

1 PLC control system,to record and display the times test , and the spread rate,

Power supply: 220V50Hz other voltages request.

Vehicle Interior Material Vertical Flammability Tester

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
glow wire test
Glow Wire Test Apparatus with Fume Cupboard of IEC60695-2-10
We are professional Glow Wire Test Apparatus manufacturers.Glow wire test apparatus.To determine the fire resistance by the fire hazard test, accordance with IEC60695-2-10, IEC60335, IEC60598 and other standards.
needle flame test apparatus
Needle Flame Test Chamber of IEC 60695-11-5
We are professional Needle Flame Test Chamber manufacturers,Needle Flame Test Machine.The instrument is designed to conform to the IEC60695-11-5, IEC60695-2-2 and other most commonly used standards in the market.
tracking index tester
Tracking Index Tester of IEC60112
We are professional Tracking Index Tester manufacturers,tracking Tester is used for the determination of comparative tracking indices of solid electrical insulating materials on pieces taken from parts of electrical and electronic equipment and on plaques of material using alternating voltages,conform to IEC 60112,IEC 60335-1,IEC 60884.
UL 94 flame chamber
Horizontal/Vertical Flame Chamber UL 94 Chamber
We are professional Horizontal Vertical Flame Chamber UL94 Chamber manufacturers, horizontal-vertical flame chamber,conform to UL94,IEC60695-11-3,IEC60695-11-4,IEC60695-11-10,IEC60695-11-20..
high current ARC restistance to ignition
High Current ARC Resistance to Ignition of UL746A HAI
We are professional High Current ARC Resistance to Ignitiong(HAI) Tester manufacturers, HAI tester,conform to UL1082 and UL746A.
High voltage Arc ignition tester
High Voltage Arc Ignition Tester of UL746A
We are professional High voltage Arc Ignition Tester manufacturers, Resistance test to High-voltage,low-current arc discharges,conform to UL746A,IEC61621, and ASTMC495.
hot wire coil ingitableility test
Hot Wire Coil Ignitability Test Apparatus
We are professional Hot Wire Coil Ignitability Test Apparatus  manufacturers.To measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source, according to IEC60695-2-20.
flame tester
Pressure Sensitive Adhesive Tapes Flame Test Apparatus of IEC60454-2
We are professional Insulating Tape Flame Test Apparatus manufacturers,Pressure-sensitive adhesive tapes flame test apparatus,conform to IEC60454-2 clause 20 and figure 10, UL 510 clause 6.

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact