High Voltage Arcus Ignition Tester Product Details: Model Zlt-HVL hoc test methodo opercula, in praevia modo, differentiation inter similes materiae et in faciendo ad in localized et causing et eget in faciendo ex localized et in faciendi in faciendo et localized et eget et exesa, secundum Iec61621, ASTMD495, Ul746A Clause 22.2. Vexillum veste: I Arc-resistentia test circuitu, ut providere summus voltage usque ad 12.5kv, PRODUCTIO I Current Imperium resistors Set cum R10, R2MMMMEMER, R4MMEMETER, et non est de 40MA et in edition of%, I electrode paro quod non est ex eo, I electrode et non est de Lectio, I electrode et non est ex eo quod est a, I Electrode et non est de Lectio, I electrode et non est ex eo, I electrode et non est de Lectio, I electrode et non per edit 2,4mm±0,05mm diameter tungsten rod which is free from cradks,pits or rough spots,the free electrode length shall be a minimum of 20 mm,shall be ground and polished to produce and angle of 300±10 to the axis, 1 electrode fixture ,to provides a means of holding the electrodes and the test specimen at the proper angle for applying the arc to the tip surface of the test specimen,each electrode shall be adjusted so that it rests independently on the test specimen with a force of 0,5N±0,05N,they lie in the same vertical plane and are both inclined 350±10 from the horizontal, 1 gauge, to measure the 6.35mm±0.08mm of two space the tips, 1 test chamber,enclosure without venting,dimensions not smaller than 300mm × 150mm × 100mm, potestate copia, 220v50Hz Alia Voltages Request.
