Flexion Test Apparatus.
Testing for Damage to and Accidental Loosening of Conductors of IEC 60947 Flexion Tester
Product details:Model ZLT-DSG3
To terminals for the connection of unprepared round copper conductors,of number,cross-section and type (flexible and/or rigid(stranded and/or solid)). according to IEC60947 figure 1 and clause 8.2.4.3, table 5.
Standard Outfit:
1 revolving platen with vertical axis of rotation, to move the conductor, clamped into the specimen,
1 accommodation for bushings, with angular contact ball bearing, built into the revolving platen with eccentricity 37,5mm, to guide the conductor clamped into the specimen, bore 15mm,
1 AC motor to drive the revolving platen at 10±2rpm,
| Power supply: | Ac.220V 50Hz or 110V 60Hz,or other voltages on request. |
| Diameter of bushing hole: | 6,5mm-9,5mm-13mm-14,5mm-15,9mm-19,1mm-22,2mm-25,4mm-28,6mm. |
| Mass: | 0,2kg-0,3kg-0,4kg-0,7kg-0,9kg-1,4kg-2,0kg-2,9kg-4,5kg-5,9kg-6,8kg-8,6kg-9,5kg-10,4kg-14kg-15kg-16,8kg-20kg-22,7kg. |
| Pulling force: | 5N-20N-40N-36N-51N-100N-103N and two of 10N-35N-200N. |
1 hand vice to fix the specimen, height(H) adjustable to 260mm-280mm-300mm-320mm-343mm-368mm-406mm-432m-464mm,with interchangeable jaws,
1 circuit continuity tester to monitor the clamping point, to stop the timer and to switch off the whole machine,
1 rack mounted unit with control panel, with main switch, timer to preselect the desired test duration, push-button for inching, start and stop push-buttons as well as switch to activate monitoring by the circuit continuity tester.
