News And Events

Lithium-lon Enclosure Pressure Test Apparatus. Read More

Spring-operated Impact Hammer Required by many Standards to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the product is examined with accessibility probes to determine access to shock, energy, and injury hazards. Built in exact accordance to IEC600 Read More

In this edition,figure 9 Pulling Test Apparatus,replaces older figure 19 of the older edition.Pulling test apparatus,the purpose of this test is to verify that the contacts of connectors and appliance outlets have sufficient mechanical strength.ZLT Pulling Test Apparatus,to determine the mechanical Read More

Proof Tracking Test Device,according to IEC60112.IEC60112 standard has been updated to 2020 edition.In this edition,introduction of a screening test,considering the fact that some materials can withstand high test voltages,but fail at lower test voltages.Screening Test is in clause 11.2.This procedu Read More

5J Spring Hammer,to impact test to the mechanical integrity of product enclosures,accordance to IEC60068-2-75 Enb,IEC60335-2-89 clause 21.103,EN,UL,CSA and other standards.Model:ZLT-CJ5,impact energy of 5 J±0,25 J, mass of striking element is 1.7 kg, hammer heads made of steel with r=25 mm, 10 N Read More

The Cable Abrasion Test Machine,to tests on extruded oversheaths with a special protective functions,according to IEC60229 figure 1,clause 4.1.2.1,BS EN 60229,BS 6724,IEC 60794-1-2 Method E2A and Method E2B Abrasion test.ZLT Cable Abrasion Test Machine was sold to UL Gmble Abu Dhabi Read More