Drop Test Horizontal Sureface.
Drop Test Horizontal Surface of IEC 62368 Impact Test Horizontal Surface.
Product details:Model ZLT-D4
Drop test horizontal surface,to drop test the sample of the complete equipment,according to IEC60950 clause 4.2.6, IEC62368 Annex T.7.
A sample of the complete equipment is subjected to three impacts that result from being dropped onto a horizontal surface in positions likely to produce the most adverse results.
The height of the drop shall be:
--750mm±10 mm for desk-top equipment and movalbe equipment;
--1000mm±10 mm for hand-held equipment,direct plug-in equipment and transportable equipment;
--350 mm±10 mm for a part acting as a fire enclsure only of desk-tip equipment and movable equipment;
--500 mm ±10 mm for a part acting as a fire enclosure only of hand-held equipment,direct plug-in equipment and transportable equipment.
The drop test horizontal surface consists of hardwood at least 13 mm thick,mounted on two layers of plywood each 18 mm±2 mm thick.
| Dimension of hardwood: | at least 13 mm thick. |
| Dimension of plywood: | two layers, each 18 mm±2 mm thick. |
| Length and width: | acustomers requirement. |
