Vehicle Interior Material Horizontal Flammability Tester
Vehicle Interior Material Horizontal Flammability Tester of The Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302; ISO 3795)
Product details:Model ZLT-CH1P
Vehicle Interior Material Horizontal Flammability Tester,test to determine horizontal burning rate of certain category automobile interior material , according to GB8410, FMVSS571.302 and IS3795 other standards.
Technical Parameters
Bunsen burner | The inner diameter of the gas burner is 9.5mm |
Vertical combustion rate | Not greater than 100mm/min |
Timing device | 9999X0.1s |
Sample holder | It consists of two U-shaped corrosion-resistant aluminum frames, with 6 pins of 4mm diameter for the lower plate and a heat-resistant metal supporting line of 0.25mm with a distance of 25mm for supporting plate. |
Flame height | 38 mm (with flame height gauge) |
Control operation | Operate by PLC touch screen |
Metal comb | The length is greater than 110mm with 7-8 smooth crests in every 25mm. |
Clamp | U-shaped with thickness of 1.0mm±0.1mm. 12 round holes with a diameter of about 4mm are drilled from the left and right sides of the clamp. |
Fuel gas | Propane, butane or methane (to be prepared by customers) |
Steel plate size | Greater than 400mm±1mm |
Chamber size | Inner size: 381*203*356mm |
Test power | 220V, 1KW |
Test environment | Environmental conditions with temperature 10 ℃ to 30 ℃ and relative humidity 10%-80%. |
Power supply | 220V50Hz other voltages request. |
